ADMV-01

Purpose:

  • Off-line measurement and accumulation of vibration parameters for a long period of time (up to 3 months).

Features:
  • Measuring peak values of vibroacceleration or vibrovelocity in the low frequency range in three directions.
  • Data accumulation in internal memory (up to 16000 measurements in each direction).
  • Comparing measured values with preset thresholds and alarming the limit excess.
  • Signaling power-supply voltage drop to the lower limit level.
  • Parameter
    Units of Measure
    ADMV-01
  • Simultaneous measurement of vibration along the axes
    -
    X, Y, Z
  • Operating frequency range with attenuation on boundaries not more than 1 dB
    Hz
    3-200
  • Amplitude range of measured vibroacceleration
    m/s2
    0.05-50
  • Amplitude range of measured vibrovelocity
    mm/s
    0.05-50
  • Built-in HF filter with decline in frequency response not less than 20 dB/decade and attenuation not greater than 1 dB
    Hz
    3
  • Built-in LF filter with decline in frequency response not less than 30 dB/decade and attenuation not greater than 1 dB
    Hz
    200
  • Accepted limits of basic relative error of vibroacceleration and vibrovelocity measurements in the ranges (0.5–50) m/ s2 and (0.5–50) mm/s, respectively
    dB
    0.5
  • Total nonlinearity of amplitude-frequency response in the measurement frequency band not more than
    dB
    1
  • Duration of single measurement
    τ, s
    2-20
  • Measurement time interval
    t, s
    5-600
  • Maximum amount of measured values on each axis, stored in the internal memory
    -
    16 320
  • Continuous operation time
    months
    3
  • Operating temperature range
    °С
    –20...+60
  • Ambient humidity
    %
    50÷100
  • Overall dimensions
    mm
    80×105×62
  • Weight
    g
    700
  • Powering from 2 lithium batteries SL-360P
    -
    3.6 V; 2*300mAh
External view of ADMV-01

Delivery set

Description Identification code Quantity
Autonomous detector for monitoring vibration ADMV-01 ABKJ.431134.015 1
Passport ABKJ.431134.015PS 1
ADMV Explorer Operator’s Manual ABKJ.00005-01 34 1
Cable USB A – A 1
Setup CD with ADMV Explorer Software 1

 

ADMV-01 programming interface

ADMV-01interface3

 

Graphic imaging:

  • Contains graphs of data read from ADMV-01 or measurement file.

ADMV-01interface2

 

Measurement table:

  • Contains numerical values of measurements along the X, Y and Z axes, indicating the index number of the measurement and its time reference.

ADMV-01interface1

 

Information window:

  • Displays the serial number and operating mode parameters of ADMV-01 connected to the computer. After reading the measurement file, the information window shows the serial number and parameters of the ADMV-01 from which the measurement data was read and written to the file.

ADMV-01interface

 

Catalog

  • ru
  • +7 (831-30) 6-77-77